slimline edge clearence

Unit 105-18568 96th Ave Surrey, BC, Cnanda, V4N 3P9 | Phone: 604-881-4881 | Fax: 604-881-4882

Standard Mecho ® SlimLine ™ Edge Clearances

For Lift-Assist Mechanism Upgrades: increase the Edge Clearance, ShadeCloth Deduct and Tube Deduct by 1/8" (3mm) on the Idle-End only. For shades with a width to height ratio greater than a 1:3 Ratio add the following to the Edge Clearance and ShadeCloth Deduct:

Greater than a 1:3 Ratio: add 1/8” (3mm)
Greater than a 1:4 Ratio: add 1/4” (6mm).
Greater than a 1:5 Ratio: add 1/2” (13mm)
Greater than a 1:6 Ratio: add 5/8” (13mm)

For Drive or Idle-End Brackets that come in contact with a surface: reduce the ratio increase by one-half.